Okey dokey. so at first I kept repeatedly getting the Red screen of death. Problem solved by disconnecting front camera. but now, It gets to 'waiting for iPhone' and then the iPhone reboots and iTunes spits out error 4013. I then tried 3u tools firmware flash, I still get stuck at 19%. I have tried DFU Mode. no help. So then in 3u tools I clicked 'exit recovery mode' and the phone went into an infinite boot loop which I had to force restore mode to stop. I am so confuzzled.
Update (02/19/2018)
Jul 18, 2017 But when should we use Recovery Mode to fix problems on our iPhone, iPad and iPad? You will find the answer in this article. We have introduce what. Jun 25, 2019 suvtje wrote:have tried some other usb cables and changed the usb port and battery nothing its the same problem come back to the itunes logo on the phone.
OK. So Upon further inspection I found the water damage indicator near the SIM card was red while the 2 others were white. So I am not sure whether it was the indicator that failed or not, as it is my grandfathers phone. he says he has never spilled/dropped it in water. everything looks clean with the exception of my fingerprints on some of the parts.
Update (02/19/2018)
I got the log from 3u tools.
----------------------------------------------------------------------------------
Activation of device used in:
Used for activating the new unactivated iDevice
Used for activating the flashed unactivated iDevice
----------------------------------------------------------------------------------
Activation supports below iDevices:
iPad1234minimini2mini3mini4AirAir2Pro
iPod Touch23456
iPhone3G3GS
iPhone44s
iPhone55c5sSE
Maschine mk3 studio one 4.5. iPhone66 Plus6s6s Plus
iPhone77 Plus
----------------------------------------------------------------------------------
Steps of activating iDevice:
1.Insert the SIM card into iDevice(iPad, iPod ignore this step), SIM card of corresponding carrier needs to be inserted into the locked iDevice
2.Please make sure iDevice under the normal status
3.Please connect your iDevice to your computer using the USB cable
----------------------------------------------------------------------------------
13:42:48 Detecting AppleMobileDevice service
13:42:48 Waiting for iDevice connect in normal mode
13:42:58 Operations are failed
13:42:58 Elapsed Time: 00:00:10
---------------------------------------------------------------------------------------------------------------------
Below devices support to query shsh:
iPod Touch2, iPod Touch3, iPod Touch4, iPod Touch5, iPod Touch6
iPad1,iPad2,iPad3,iPad4,iPad Air,iPad Air2,iPad mini/2/3/4,iPad Pro
iPhone3G,iPhone3GS,iPhone4,iPhone4s,iPhone5,iPhone5c,iPhone5s,iPhone se
iPhone6/6s,iPhone6p/6sp,iPhone7/7p,iPhone8/8p,iPhoneX
---------------------------------------------------------------------------------------------------------------------
Steps to enter DFU Mode:
1. Keep iDevice in Normal Mode or Recovery Mode, plug USB cable (please don't use USB extension cable)
2. Hold HOME button(iPhone7/7p hold Volume Down button instead), then hold POWER button until the screen is blank
3. Release the POWER button after about 4 seconds, but keep holding the HOME button for about 10 seconds
iPhone8, iPhone8 Plus Steps to enter DFU Mode:
1. Plug an original USB cable,quick-press Volume '+' button, then Volume '-' button and hold the Power button.
2. When the iDevice turns off, hold the Volume '-' button, then release the Power button after 5 seconds, till it prompts 'succeded'.
More tutorials about iPhone8/8p and other iDevices, you could refer from: http://url.3u.com/RZbM7naa
---------------------------------------------------------------------------------------------------------------------
13:45:33 Friendly reminder:
13:45:33 Please make sure iDevice turned off 'Find My iPhone'
13:45:33 The iDevice could not be activated without Apple ID after flash, if the iDevice turned on 'Find My iPhone'
13:45:33 Method to check: Settings -> iCloud -> Find My iPhone
---------------------------------------------------------------------------------------------------------------------
13:45:33 Please connect USB cable to iDevice, make sure your iDevice in DFU Mode
13:45:33 Reading information from iDevice
13:45:33 ECID: 000003F4AD9F4C1C
13:45:33 Product Type: iPhone6,1
13:45:33 Hardware Model: n51ap
13:45:33 Downloading config
13:45:35 Download request file
13:45:35 Reading random NONCE
13:45:35 Querying for SHSH file on Apple Server
13:45:35 Saving SHSH file to our server
13:45:36 Generator: 0x5606b776c17ce4b6
13:45:36 Requesting shsh2
13:45:36 Saving SHSH file to our server
13:45:37 11.2.5(15D60) Apple still supports the signing of this firmware
13:45:37 Your iDevice has the following SHSH backups:
13:45:37 10.1(14B72)-----Apple server no longer supports the flash of this firmware version
Indian flute vst download. 13:45:37 10.1.1(14B100)--Apple server no longer supports the flash of this firmware version
3utools Stuck At 20
13:45:37 11.2.5(15D60)---You can flash the official firmware iPhone_4.0_64bit_11.2.5_15D60_Restore.ipsw
13:45:37 Flash and jailbreak of apple device, please visit official website of 3uTools http://www.3u.com
13:45:37 Elapsed Time: 00:00:04
---------------------------------------------------------------------------------------------------------------------
Below iDevices support to professional flash:
iPod Touch2, iPod Touch3, iPod Touch4, iPod Touch5, iPod Touch6
iPad1,iPad2,iPad3,iPad4,iPad Air,iPad Air2,iPad mini/2/3/4,iPad Pro
iPhone3G,iPhone3GS,iPhone4,iPhone4s,iPhone5,iPhone5c,iPhone5s,iPhone se
iPhone6/6s,iPhone6p/6sp,iPhone7/7p,iPhone8/8p,iPhoneX
---------------------------------------------------------------------------------------------------------------------
Steps to enter DFU Mode:
1. Keep iDevice in Normal Mode or Recovery Mode, plug USB cable (please don't use USB extension cable)
2. Hold HOME button(iPhone7/7p hold Volume Down button instead), then hold POWER button until the screen is blank
3. Release the POWER button after about 4 seconds, but keep holding the HOME button for about 10 seconds
iPhone8, iPhone8 Plus Steps to enter DFU Mode:
1. Plug an original USB cable,quick-press Volume '+' button, then Volume '-' button and hold the Power button.
2. When the iDevice turns off, hold the Volume '-' button, then release the Power button after 5 seconds, till it prompts 'succeded'.
More tutorials about iPhone8/8p and other iDevices, you could refer from: http://url.3u.com/RZbM7naa
---------------------------------------------------------------------------------------------------------------------
13:45:57 Friendly reminder:
13:45:57 Please make sure iDevice turned off 'Find My iPhone'
3utools Stuck At 60 Years
13:45:57 The iDevice could not be activated without Apple ID after flash, if the iDevice turned on 'Find My iPhone'
13:45:57 Method to check: Settings -> iCloud -> Find My iPhone
---------------------------------------------------------------------------------------------------------------------
13:45:57 Please connect USB cable to iDevice, make sure your iDevice in DFU Mode
13:45:57 Reading information from iDevice
13:45:57 Product Type: iPhone6,1
13:45:57 MAIN CPU ID: 8960
13:45:57 Filename of firmware : iPhone_4.0_64bit_11.2.5_15D60_Restore.ipsw
13:45:57 Firmware Version: 11.2.5
13:45:58 Product Build: 15D60, 15
13:45:58 Image4 supported: TRUE
13:45:58 Extracting FileSystem from firmware
13:45:58 Reading ECID
13:45:58 iDevice ECID: 000003F4AD9F4C1C
13:45:58 Reading random NONCE
13:45:58 Querying for SHSH file on Apple Server
13:45:58 Saving SHSH file to our server
13:45:59 iDevice will connect to DFU Mode automatically (5 minutes in Win7)
13:45:59 Loading iBSS component
13:46:01 Reading random NONCE
13:46:01 Loading iBEC component
13:46:22 iDevice will connect to Recovery Mode automatically (5 minutes in Win7)
13:46:22 Loading RestoreRamdisk
13:46:28 Connecting with Restore Mode
Is this a good question?
Comments:
@paperboypaddy I know you have a lot of apple devices. ever come across this?
Wow no I haven’t had any problems with my iPhones or anything else. So to clarify the iPhone stopped working? And had this error? I have had problems with my laptop resetting windows. But that’s completely different than a iPhone. I know it doesn’t have a warranty but maybe the Apple store can take a look at it.
We have introduce How to enter Recovery Mode. But when should we use Recovery Mode to fix problems on our iPhone, iPad and iPad? You will find the answer in this article.
3utools Stuck At 80
1. 'Connect to iTunes' Screen on iPhone/iPad/iPod
When you try to get a OTA update for, say, iOS 10, the “Connect to iTunes” screen suddenly shows up. This means that there is an error happening during the iOS update and your iDevice have entered the Recovery Mode automatically.
Troubleshooting:
Firstly, you could try to restart your iDevice:
For an iPhone 6s and earlier, iPad, or iPod touch: Long press both the 'Power off' and 'Home' buttons simutaneously for at least ten seconds, until you see the Apple logo.
For an iPhone 7 or iPhone 7 Plus: Press and hold both the 'Power off' and 'Volume Down' buttons. Don't release the two buttons until you see the Apple logo.
But most of the time a restart would not work. For example, this year when iPhone/iPad bricked during iOS 10 OTA update, a restart didn't work and we needed to connect our devices to iTunes and reinstall iOS in recovery mode.
Step 1. Make sure your iTunes has been updated to the newest version.
Step 2. Use lightning cable to connect your iOS device to iTunes.
Step 3. You'll get the message 'The software on iPhone/iPad/iPod needs to be restored to factory settings or updated'.
Step 4. Click 'Update' to reinstall iOS and so that you can keep personal data . If you choose 'Restore', it will delete all contents in your device.
2. iDevice Stuck at An Apple Logo
The error often happens when you try to restore your iDevice from a backup. An apple logo appears on your iPhone/iPad/iPod touch screen with no progress bar. And users who attempt to jailbreak their devices also encounter the problem sometimes.
Troubleshooting:
To get your iDevice out of the problem, you need to force a restart on the device to recovery mode.
Step 1. Connect your device to a computer via USB cable. Then launch iTunes on the computer.
Step 2. Put your iDevice into Recovery Mode.
Step 3. When you get the option to restore or update your device, click 'Update'. iTunes will try to reinstall iOS to your device without erasing to data. If iTunes takes more than 15 minutes to download iOS and your device exits the recovery mode, enter the recovery mode again and try for another time.
Plus, you could also “Easy Flash” your iDevice by 3uTools, but make sure your iDevice is in Recovery mode.
3. iTunes Couldn't Recognize Your iDevice
You could also face the situation when you try to get an iOS update. iTunes can't recognize your iDevice and says the device is in recovery mode.
3utools Stuck At 19
Step 1. Close your iTunes. And re-open iTunes after you have connected your device to your computer.
Step 2. Put your device into recovery mode.
Step 3. Click 'Update' first to reinstall iOS. But if it takes more than 15 minutes and your device exits recovery mode. Re-enter recovery mode and try 'Restore'. Restoring your device in recovery mode will wipe out all personal data. But you can then restore a iTunes or iCloud backup and recover the deleted data via 3uTools.
4. iDevice is Disable Because of Wrong Passcode
3utools Stuck At 60 Minutes
Please check this tutorials: How to Restore A Disabled iPhone Using 3uTools?
3utools Stuck At 60 Days
Related Articles