- Download Revalver Hpse Full For Free Vst 32 Bits Full
- Download Revalver Hpse Full For Free Vst 32 Bits Free
VSTHost is a little demonstrational Windows program to understand the inner workings of VST plug-ins. Features include loading VST effects (aka 'plugins'), parameterize or edit them, sound output. Apr 29, 2018 Peavey ReValver 4 Crack + License Key Full Latest Peavey ReValver Crack is a revolutionary amp modeling software that’s has capabilities to capture the true characteristics of real tube amplifiers. It’s running as an AAX/VST, plug in and also running a standalone application which is achieved by updated and improved the modeling engine.
This is a weird one, and not sure if it can or will ever be fixed, but thought I'd post it regardless. As far as I can tell it's specific to FL Studio, not the plugin. I know this sounds like a pretty minor problem, but it was a pretty frustrating couple of hours trying to figure out why presets weren't sounding the way I'd saved them, and why output levels kept changing unexpectedly. So hopefully if any other guitar players out there use this with FL Studio, this will save them some frustration.Summary: When using the 64bit VST plugin for Revalver 4 (https://peavey.com/products/revalver/), any time a preset is loaded that uses the 'CLEAN' channel of the 'ACT Combo' amplifier, the output volume is low and tone/distortion incorrect until the 'Gain' knob is clicked once. This repeats any time a preset is loaded that uses the clean channel of this amp. It does not happen with the 'CRUNCH' or 'HEAVY' channels of the amp.
Steps to reproduce: (1) Load the 64 bit version of Revalver into FLStudio. (2) In the preset menu, select any preset that uses the ACT Combo amplifier and is labeled 'Clean'. (3) Supply some kind of signal or test tone to the plugin, and note the sound and volume level of the output. (4) Click the Gain knob once, anywhere. Doesn't need to be turned, just clicked. (5) The volume of the output will increase noticeably and the tone will change too.
I've done a lot of testing and the output that you get after clicking the gain knob is the correct output. This only happens with the 64 bit version of the plugin, and it seems to only happen in FL Studio. I've tried hosting it in several other free 64-bit VST hosts and couldn't reproduce the problem in any of them. The 64 bit plugin does this whether running natively in 64 bit FL Studio or bridged in 32 bit FL Studio, and it happens in the latest FL v20 and also with my old v12 installation.
The 32bit version of the plugin works as it's supposed to in FL Studio, but I'd prefer not to have to use it bridged because it's a CPU hungry plugin already.
The image I attached below has more info. I've tried all of the recommended troubleshooting steps, all of the options in the plugin wrapper, fixed sized buffers, align tick lengths, etc., etc. Nothing has made any difference.
Here is a screen capture with test tone audio of the behavior:
Here is an image with more info:And lastly here is my diagnostic log:
Figure 1: ReValver III.V adds several new amps, the Budda Budwah stompbox, the Peavey VCL-2 opto compressor and a dizzying multitude of new impulse responses to the popular guitar-amp simulator.
When it bowed a couple of years ago, Peavey ReValver MK III guitar-amp simulation software garnered a lot of rave reviews for its tube-like tone and the ability to tweak its virtual electronics right down to the component level (for example, modifying the plate load of its simulated tubes). ReValver MK III.V—a paid upgrade from MK III—adds seven new amps, the Budda Budwah effect and Peavey VCL-2 compressor modules, to the mix. (See Fig. Good auto tune plugin. 1.) It also more than quintuples the number of convolution-based speaker simulations to 778, counting impulse responses that incorporate variations on microphone choice and position for the same cabinet.
ReValver MK III.V (Mac/Win) supports AU, RTAS and VST plug-in formats, and an included stand-alone version implements full MIDI mapping. I reviewed the AU plug-in in MOTU Digital Performer Version 7.21 using an 8-core Mac Pro running Mac OS 10.5.8. My sonic evaluations were made playing a ’62 Strat routed in series through a Demeter tube direct DI box, Millennia HV-3D preamp, Apogee Rosetta A/D and MOTU 2408mk3 I/O box (digital input).
LOOKING BACK AND FORWARD
For the uninitiated, ReValver allows you to chain together scores of stompbox, preamp, power amp, amp (preamp and power amp), cabinet and effects modules in both serial and parallel configurations. Drag and drop modules allow you to change the order in which they are chained. You can add tone stacks and swap out or add virtual tubes to your amp sims and save the result as a custom impulse response (a stereo, 44.1kHz WAV file) to load into a speaker-simulation module. It’s all very intuitive.
With the addition of its new modules, MK III.V now offers simulations of 21 stompboxes, 21 amps and 11 effects. (The Effects browser also includes a VST host module, which allows ReValver to use third-party VST plug-ins with AU and VST hosts.) In addition to its hugely expanded library of convolved sims, MK III.V also includes the same modeled speaker emulations (called Speaker Construction Sets) as offered in MK III.
ReValver MK III.V offers both a 32-bit mode for real-time processing and a 64-bit, 4x oversampled “mixdown” mode for bouncing the track offline. (Mixdown mode yields very high-resolution processing, but is too CPU-intensive for real-time use.) Both modes sound great.
More importantly, the MK III.V update still doesn’t allow you to synchronize any time-based effects (delays and reverbs) to your host DAW’s tempo. Only the stand-alone version of MK III.V can automate module parameters using MIDI; the plug-in versions of MK III.V support automating its parameters using your DAW’s facilities. ReValver lacks undo and redo functions.
So the MK III.V upgrade is all about the new tone palettes that it brings to the party. For that reason, I’ll focus this review on my impressions of the new modules, starting with the Redhot amp.
AMPED UP
The highly musical Redhot amp module emulates the Orange AD30. It has two dual-stage channels. Channel One is a bit brighter and grittier than Channel Two, yet manages to sound ultra-smooth and tube-like, even when pushed hard on rock solos. Channel Two generally has a warm and thick tone that is perfect for cleaner rhythm guitar parts and very pristine arpeggios. But put a preamp module in front of it, and it too can really bark.
The Peavey Sensation 20 amp module is a single-channel affair with a vaguely similar vibe to the Redhot amp’s Channel One when pushed hard. It doesn’t sound as creamy and full-bodied as the Redhot and can sometimes seem a bit glassy on clean and bright settings. The Sensation 20 module includes onboard reverb.
The Peavey Masterpiece 50 amp offers two channels: one clean and the other overdriven. The clean channel gave nicely crunchy chords, but I couldn’t make it sound pristine enough to produce bell tones. The overdriven channel cranked out gorgeous-sounding timbres for lead solos—full-bodied and creamy, with gobs of sustain. It accomplishes this by adding two stages of gain to the clean channel when you activate the module’s Lead switch. On the downside, the module’s onboard reverb was apparently broken: On its maximum setting, I could barely hear any effect, even on a soloed track. (Peavey is fixing the problem in a future software update.)
Download Revalver Hpse Full For Free Vst 32 Bits Full
The Peavey 3120 amp module has three channels: Clean, Crunch and Ultra. I liked this module for overdriven rock tones but not much else. The Clean channel sounded very discordant; I can’t imagine ever trying to use it to coax pristine tones. The Crunch channel easily provided enough overdrive for classic-rock guitar solos but I couldn’t clean it up enough for blues chording. The Ultra channel produced over-the-top but very smooth distortion that sounded great.
Figure 2: The versatile Demon amp module offers three channels that together range in tone from sparkly clean to brutally distorted.
The versatile Diezel VH4 amp module (modeled after the Diezel Demon; see Fig. 2) has three channels, and it offers superb tones ranging from sparkly clean (Channel One) to massively distorted (Channel Three) and all timbres in between (Channel Two). You can get more sustain and attitude with the Diezel VH4 than with the Redhot amp, making it a prime candidate for laying down hard-rock tracks. A global mid-cut control provides far greater attenuation of midrange frequencies than the Middle tone controls dedicated to each channel; it’s your ticket to a heavily scooped sound.
I really love the Drive 18 Series II and Super Drive V20 amp sims. These two modules sport identical control sets. They each provide separate gain controls for their Rhythm and Drive channels. It’s a little harder to coax super-clean tones out of these sims, but you can get there by starving their gain controls almost to the point of killing all sound and cranking ReValver’s output gain in the Title module. The crunchy and overdriven sounds are some of the best ReValver has to offer—warm, smooth and tubey. The Super Drive V20’s Drive channel generally has a thicker sound than that produced by the Super Drive 18 Series II, which sounds tighter and more present.
SPEAKERS AND PROCESSORS
The amp modules’ inherent sound can be modified far and wide using an almost unlimited supply of modeled and convolved speaker simulations. For example, the British Collection of stock impulse responses includes, among many other offerings, single-mic setups for a Redhot cab with a single 12-inch speaker. Your choice of virtual mics includes a Sennheiser MD 421, Royer R-121, Shure SM57 and Neumann U87, placed at zero, two or seven inches from the speaker cone or edge. If you can’t get the tone you want from this deep of an impulse library—not to mention the abundant modeled speakers—it’s time to hang it up and take up clarinet.
Figure 3: ReValver MK III.V offers two superb Budda amp modules. The Budda Drive 18 Series II is shown here.
The new Peavey VCL-2 compressor module emulates an opto-electronic design. Threshold and gain controls dial in compression or limiting, depending on a switch setting. Placed after the Budda Drive 18 Series II amp module (see Fig. 3) and one of ReValver’s default cabinets, the VCL-2 produced beautifully tight and slappy chords that brought out my inner Doobie Brothers. Inserting MK III.V with only the VCL-2 module loaded on a lead-vocal track, I got decent results: Dynamics were smoothly reined in, but depth suffered a bit more than when using my premium opto-compressor plug-ins.
The Budda Budwah is a stompbox effect modeled from the Budwah wah-wah pedal. While it can’t produce sounds as extreme in range and resonance as ReValver’s legacy Wow-Wah stompbox, the Budwah is much more musical, realistic-sounding and easy to use. Mouse-drag the virtual footpedal left and right to modulate the filter. Turn up the Curve control to make the pedal more responsive for the same amount of travel. Because the ReValver plug-in doesn’t respond to MIDI, I simply automated the footpedal’s action in Digital Performer.
BIG SONIC UPGRADE
MK III.V provides new tone-sculpting amps that, taken as a group, allow you to alternately dial in clean, slightly edgy, mildly distorted and severely overdriven tones with equal finesse. Not every amp is a home run, but together they constitute a grand slam. Add the musical Budwah and VCL-2 modules and the hundreds of new impulse responses of miked speaker cabinets, and ReValver MK III.V presents a very potent allure to both new amp-sim buyers and those looking to upgrade from MK III.
Mix
contributing editor Michael Cooper is the owner of Michael Cooper Recording in Sisters, Ore./coda-serum-presets-free-download.html.
Download Revalver Hpse Full For Free Vst 32 Bits Free
Peavey Sound Demo of ReValver MK III.V